Water Damage Mitigation Contractor

IICRC #7337624 Certified Residental & Commercial Water Damage Restoration Service, Storm Damage Restoration, Insurance Damage Claims Estimator

Serving All Of Central Kentucky

Go back

Your message has been sent

We are an IICRC Water Damage Restoration Master Restorers

Book Now

We Are Also IICRC Certified Master Fire Damage Restorers Click To Book

https://wa.me/message/EUEY2OBDZVI5I1

24 HR Water Removal Services Click To Call

  • The Importance of Exterior and Interior Waterproofing

    This basement was below grade, the waterproofing product used to seal the exterior when constructed, had degraded and delaminated over time.

    The Importance of Exterior and Interior Waterproofing

    Waterproofing is an essential aspect of maintaining the structural integrity and longevity of any property. Whether it’s a residential home, a commercial building, or an industrial facility, ensuring that both the exterior and interior are well-protected from water damage can save you significant time, money, and stress in the long run. Here’s why you might need exterior or interior waterproofing and how it can benefit your property.

    Understanding Exterior Waterproofing

    Exterior waterproofing focuses on protecting the outer structure of a building from water infiltration. This type of waterproofing is crucial for several reasons:

    1. Preventing Structural Damage: Water seepage can weaken the foundation, leading to cracks and structural instability. Exterior waterproofing helps keep water away from the foundation, preserving its strength and durability.
    2. Mold and Mildew Prevention: Moisture can create an ideal environment for mold and mildew growth, which can cause health issues and damage building materials. Exterior waterproofing reduces the risk of mold and mildew by keeping water out.
    3. Enhancing Property Value: A well-maintained, waterproofed exterior can increase your property’s market value. Potential buyers are likely to pay more for a home or building that doesn’t have water damage issues.
    4. Energy Efficiency: Waterproofing can also improve your property’s energy efficiency. Proper insulation and waterproofing can help maintain indoor temperatures, reducing the load on heating and cooling systems.

    The Role of Interior Waterproofing

    Annual inspections are needed to maintain waterproofing efforts all of our waterproofing installations come with regular maintenance and inspections

    Interior waterproofing is equally important and serves as an additional line of defense against water intrusion. Here’s why you might need interior waterproofing:

    1. Basement Protection: Basements are particularly susceptible to water infiltration. Interior waterproofing helps keep basements dry, preventing damage to personal belongings and reducing the risk of mold growth.
    2. Mitigating Existing Water Problems: If your property already has water issues, interior waterproofing can help manage and reduce the impact. This approach includes installing sump pumps, interior drainage systems, and waterproof coatings.
    3. Health and Safety: A dry interior environment is crucial for maintaining good indoor air quality. Waterproofing helps prevent mold and mildew, which can cause respiratory problems and other health issues.
    4. Longevity of Building Materials: Water damage can cause significant wear and tear on building materials. Interior waterproofing protects walls, floors, and other structures from moisture, prolonging their lifespan.

    Choosing the Right Waterproofing Solution

    Determining whether you need exterior or interior waterproofing—or both—depends on your specific situation. Here are some factors to consider:

    • Climate and Weather Conditions: Properties in areas with high rainfall or prone to flooding may benefit more from exterior waterproofing.
    • Age and Condition of the Property: Older properties with existing water damage may require comprehensive interior waterproofing solutions.
    • Budget and Resources: While exterior waterproofing is typically more expensive, it offers long-term benefits. Interior waterproofing can be a cost-effective solution for managing current issues.

    Professional Waterproofing Services

    IICRC Water-Mold-Smoke-Fire Damage Certified Professionals Call ☎️ 859-267-3482

    At Property Damage Solutions, we specialize in both exterior and interior waterproofing services. Our team of experts can assess your property, identify potential water intrusion points, and recommend the best solutions to protect your investment.

    Conclusion

    Waterproofing is not just an optional upgrade; it’s a necessary step to protect your property from the damaging effects of water. Whether you need to safeguard the exterior, manage existing interior issues, or both, professional waterproofing services can help you maintain a safe, dry, and valuable property. Contact us today to learn more about our comprehensive waterproofing solutions and how we can help you achieve peace of mind and long-term property protection.

    For more information, visit Property Damage Solutions or give us a call at 859-302-9666. Let us help you keep your property safe from water damage.

  • Understanding Whiskey Fungus: Causes, Effects, and Prevention

    Whiskey Fungus Is A Black Mold

    Whiskey fungus, also known as Baudoinia compniacensis, is a type of black mold that commonly grows on buildings and structures near whiskey distilleries and other facilities where ethanol is produced. While whiskey fungus itself does not pose significant health risks to humans, it can cause aesthetic and structural damage to buildings and outdoor surfaces. In this article, we’ll explore the causes, effects, and prevention measures for whiskey fungus.

    Causes of Whiskey Fungus:

    Whiskey fungus thrives in environments with high levels of ethanol vapor, which are typically found near distilleries, breweries, and other industrial facilities where alcohol is produced. The fungus feeds on the ethanol vapors released during the fermentation and aging processes, as well as on other organic compounds present in the air.

    Houses Near Distilleries Commonly Need Pressure Washed And Treated

    Effects of Whiskey Fungus:

    1. Aesthetic Damage: The most noticeable effect of whiskey fungus is the black staining it creates on outdoor surfaces such as buildings, fences, and trees. These unsightly stains can detract from the appearance of properties and structures, leading to concerns among property owners and communities.
    2. Structural Damage: In addition to aesthetic concerns, whiskey fungus can also cause structural damage to buildings and other surfaces over time. The fungus can penetrate and degrade certain types of building materials, including wood, concrete, and metal, potentially compromising their integrity and longevity.
    3. Environmental Impact: Whiskey fungus releases spores into the air, which can spread and settle on nearby vegetation, soil, and water bodies. While the impact of whiskey fungus on the environment is relatively minimal compared to other types of pollution, it can still contribute to ecological changes in affected areas.
    We use a plant based anti microbial in our monthly treatments for clients as well as thorough inspections to the most vulnerable areas of the home. These monthly treatments are for any microbes as well as whiskey fungus.

    Prevention of Whiskey Fungus:

    1. Site Selection: When planning the location of a distillery or industrial facility, consider the surrounding environment and potential impacts on nearby properties. Choose sites with adequate distance from residential areas and sensitive ecosystems to minimize the risk of whiskey fungus growth.
    2. Emissions Control: Implement measures to control and reduce emissions of ethanol vapors and other organic compounds from production processes. This may include installing vapor recovery systems, improving ventilation, and optimizing fermentation and aging techniques to minimize emissions.
    3. Surface Treatments: Apply protective coatings or sealants to outdoor surfaces to create a barrier against whiskey fungus growth. These treatments can help prevent the fungus from establishing a foothold and make it easier to clean and remove any staining that does occur.
    4. Regular Maintenance: Implement a regular maintenance schedule to inspect and clean outdoor surfaces for signs of whiskey fungus growth. Promptly remove any black stains using appropriate cleaning methods and products to prevent further spread and damage.
    5. Community Engagement: Foster open communication and collaboration with local communities and stakeholders to address concerns related to whiskey fungus. Educate residents and property owners about the causes and effects of the fungus and involve them in discussions about prevention and mitigation strategies.

    Conclusion:

    Whiskey fungus may not pose a direct health risk to humans, but its presence can have significant aesthetic and structural impacts on buildings and outdoor surfaces near distilleries and industrial facilities. By understanding the causes of whiskey fungus and implementing proactive prevention measures, we can minimize its effects and preserve the integrity and beauty of our communities.

    For professional assistance with whiskey fungus removal and prevention, contact Property Damage Solutions at (859) 302-9666 or email propertydamage123@gmail.com.

    We Are IICRC Certified Mold Removal Specialists Call, Text, Email, we do emergency water extraction 24/7/365

  • Emergency Water Extraction from Basements and Crawlspaces in Richmond, Kentucky

    Emergency Water Extraction from Basements and Crawlspaces in Richmond, Kentucky

    When disaster strikes, swift action is crucial to minimize damage and restore normalcy. At Property Damage Solutions, we specialize in emergency water extraction services for basements and crawlspaces in Richmond, Kentucky, and surrounding areas of central Kentucky. With our prompt response and expertise, we’ll help you mitigate water damage effectively, ensuring your property is restored to its pre-loss condition.

    Expert Water Extraction Services

    Our team of skilled professionals is equipped with state-of-the-art equipment and industry-leading techniques to tackle water emergencies of any scale. Whether it’s a burst pipe, flooding, or any other water-related catastrophe, we’re here to provide swift and efficient water extraction services.

    Comprehensive Assessment and Planning

    Upon arrival at your property, our certified technicians will conduct a thorough assessment of the water damage. We’ll determine the extent of the damage and formulate a tailored plan to address the situation effectively. Our goal is to minimize disruption to your life and property while ensuring thorough water extraction and drying.

    Advanced Equipment and Techniques

    At Property Damage Solutions, we utilize advanced water extraction equipment, including powerful pumps, extractors, and dehumidifiers, to remove water quickly and efficiently. Our team is trained in the latest techniques for water removal and structural drying, ensuring that your property is dried thoroughly to prevent mold growth and structural damage.

    24/7 Emergency Response

    Water emergencies can happen at any time, day or night. That’s why we offer 24/7 emergency response services to our clients in Richmond, Kentucky, and the surrounding areas. You can count on us to be there when you need us the most, ready to provide immediate assistance and peace of mind.

    a man in a white suit and protective gear

    Licensed, Bonded, and Insured

    Property Damage Solutions is a licensed, bonded, and insured water damage restoration company. We adhere to the highest industry standards and regulations to ensure the safety and satisfaction of our clients. With us, you can rest assured that your property is in capable hands.

    Contact Us Today

    Certified water damage restoration company information Call ☎️ 859-302-9666

    Don’t let water damage wreak havoc on your property. If you’re facing a water emergency in your basement or crawlspace, don’t hesitate to contact Property Damage Solutions at 859-302-9666. Our team is standing by to provide prompt, professional assistance and help you restore your property to its former glory.

  • How Does A.T.P testing work

    The following article explains; How Does A.T.P testing work.

    ATP (Adenosine Triphosphate) testing is a method used to determine the presence of biological contamination, such as bacteria, yeast, or mold, in a sample. The test works by measuring the amount of ATP (a molecule found in all living cells) in a sample using a luminometer.

    A.T.P testing with a luminometer
    A.T.P Testing With A Luminometer

    Typically, the sample is mixed with a reagent called luciferin, which reacts with ATP to produce light. The amount of light produced is proportional to the amount of ATP present in the sample. The light emission is then measured by the luminometer, and the result is reported in relative light units (RLU). High RLU values indicate high levels of ATP and therefore high levels of biological contamination.

    ATP testing is widely used in a variety of industries, including food safety, environmental monitoring, and healthcare, as a quick and simple way to assess the level of hygiene and cleanliness in a given area.

  • , , , , , , , , , , , , ,

    How to thaw frozen pipes

    For emergency water removal call ☎️ (859)302-2702

    Old man winter is unbearable as it is, water damage from burst frozen pipes in the middle of it can be a nightmare. Should your pipes freeze, the following will give you tips on how to thaw frozen pipes.

    Tips on thawing frozen water pipes to parent water damage

    Thawing Frozen Pipes

    What to do if a pipe bursts

    https://www.lex18.com/news/unprecedented-number-of-water-pipes-break-in-lexington?_amp=true

    If a pipe bursts in your home, you’ll need to act fast to mitigate additional damage. Shut off your water as quickly as possible. This will help minimize the amount of water that seeps out inside your walls. You may also want to shut off power in the affected area of your home. After you’ve taken these precautionary steps, it’s time to call a plumber and start mopping up any mess that’s been caused. Try to remove as much of the water and lingering moisture as you can to avoid mold and mildew buildup. Depending on the severity of your case, you may also need to bring in other professionals to address damage to your walls, carpet, flooring or ceiling.

    Shit water off to prevent water damage in case a pipe bursts

    How to thaw out pipes

    How can you tell if your pipes are frozen? If you turn on the bathroom or kitchen faucet and see only a few drops or a trickle of water, this could indicate that water inside the pipes has frozen – preventing a free flow. But don’t panic. You may be more equipped to deal with the situation than you think. Here’s a quick lesson on how to thaw a frozen pipe.

    Step 1. Turn on the faucet

    Keep it running. Allowing the faucet to drip even slightly can help prevent a pipe from bursting. It’s simple – when freezing takes place, extreme pressure builds between the faucet and the ice blockage. An open faucet relieves this pressure buildup, in turn preventing a burst from occurring.

    Step 2. Apply heat to the frozen area, thermal energy promotes drying.

    Slowly apply heat using a hair dryer. There are several ways to do this. You can wrap the pipes in thermostatically controlled heat tape, or you can use an external heat source such as a hair dryer or space heater. Do not use a propane torch as this can damage the pipe and present a fire risk.

    If you decide to use a hair dryer, begin directing air close to the faucet end of the pipe and gradually move toward the coldest section. Be careful not to overheat the hair dryer or blow a fuse. Remember, the faucet should be left on while heat is being applied.

    Step 3. Continue to apply heat

    Don’t stop heating until full water pressure is restored. Even then, it’s a good idea to leave the faucet open for a few minutes after the pipe is thawed. This will give the ice time to completely clear from the line.

    Ways to thaw frozen pipes

    Step 4. Check all faucets and prevent pipes from freezing in the future

    Check each faucet in your home for any other frozen pipes. One frozen pipe may mean that others have been affected as well.

    If the problem persists, contact a plumber. You can prevent pipes from freezing again by taking a few simple steps:

    Before traveling, keep the temperature in your home above freezing and turn off all the water to your house.

    Be sure to keep all water pipes, especially those close to outside walls, insulated with foam rubber or heating cable.

    Keep cabinet doors open to allow air to circulate.

    Let your faucets drip cold water – it is harder for a pipe to freeze even if there is a trickle of water flowing through. In order to not waste water, you can collect the drops and reuse it, possibly for cleaning or watering plants.

    How long does it take for pipes to unfreeze?

    Using any of the handful of methods on how to thaw frozen pipes will typically take about 30 minutes. This can vary depending on the weather, how long the pipe has been frozen and where the pipe is located. Any of these factors can cause the thawing process to take longer.2

    And remember, a frozen pipe isn’t the only issue that comes with cold weather. Find out other ways to protect your home during the winter.

    Ways to prevent frozen pipes

    Quick tip on drying if you have a pipe burst, find out the GPP (grains per pound) inside your home and then outside, you can do this by purchasing a thermometer hydrometer. If the gpp is lower outside than inside, then you can dry your home with what is known in the water damage restoration industry as “an open drying system. Click to check out our mold damage prevention tips there is more tips on how to dry a house out after water damage without water damage restoration equipment.

  • , , , , , , , , , , , , , , , , ,

    Preparing for Basement Waterproofing: The Importance of Wire Brushing Cement Blocks

    Preparing for Basement Waterproofing: The Importance of Wire Brushing Cement Blocks

    The calcification of the moisture coming through the CMU

    When it comes to maintaining the structural integrity and value of your home, basement waterproofing is a crucial step. Moisture intrusion not only causes damage to the foundation but can also lead to mold growth, which poses significant health risks. One essential part of the waterproofing process involves prepping the basement walls by wire brushing the cement blocks. In this article, we’ll explore why this step is important and how to do it effectively.

    💦Waterproofing
    Experts💦

    Pages: 1 2

  • Maximize Your Property Restoration Efficiency with Google Workspace

    Maximize Your Property Restoration Efficiency with Google Workspace!

    At Property Damage Solutions, we understand the importance of streamlined communication and efficient project management in the restoration industry. That’s why we’ve integrated Google Workspace into our operations, and we want to share the benefits with you!

    Enhance Collaboration

    With Google Workspace, you can seamlessly share documents, spreadsheets, and presentations with your team, clients, and partners. The ability to co-edit documents in real-time ensures everyone stays on the same page, which is crucial during restoration projects where time is of the essence.

    Stay Organized

    Google Calendar is an essential tool for scheduling and tracking appointments, meetings, and deadlines. You can create multiple calendars for different projects, set reminders, and share calendars with your team to keep everyone informed and synchronized.

    Get Organized

    Improve Communication

    Use Gmail for professional and secure communication with your clients and team members. Google Meet provides high-quality video conferencing, allowing you to conduct virtual meetings, consultations, and check-ins without the need for in-person visits.

    Access Anywhere

    Whether you’re in the office, on-site, or on the go, Google Workspace ensures you can access your files and work from any device. The cloud-based storage provided by Google Drive allows you to store and organize your documents securely, with easy access from smartphones, tablets, and computers.

    Streamline Document Management

    Google Docs and Google Sheets are perfect for creating and managing project documents and spreadsheets. Use Google Forms to create surveys and gather feedback from clients and team members. Google Slides can help you create compelling presentations for client pitches and project updates.

    Secure Data and Reliable Backup

    Google Workspace offers robust security features, including two-factor authentication and advanced phishing protections, ensuring your data is safe. Regular backups and data recovery options give you peace of mind that your important documents are always protected.

    Integrate with Other Tools

    Google Workspace seamlessly integrates with other popular tools and services you might already use, such as Xactimate, QuickBooks, and various CRM systems. This integration further enhances your productivity by allowing for smooth data transfer and workflow automation.

    Custom Email Domain

    Professionalism is key in the restoration business. With Google Workspace, you can set up custom email addresses using your business domain, giving your communication a more polished and trustworthy appearance.

    We invite you to experience the efficiency and organization Google Workspace brings to your restoration projects. Click here to get started and see how it can revolutionize your business operations.

    Don’t miss out on the opportunity to enhance your efficiency and productivity. Join us in leveraging the power of Google Workspace today!

    GoogleWorkspace #PropertyDamageSolutions #RestorationEfficiency #TeamCollaboration #StreamlineOperations #ProfessionalEmail #DataSecurity #CloudStorage #BusinessIntegration

  • Why You Should Use Google Workspace for Your Business

    Why You Should Use Google Workspace for Your Business

    In today’s fast-paced business environment, choosing the right tools to enhance productivity and collaboration is crucial. Google Workspace (formerly G Suite) offers an integrated suite of cloud-based tools that cater to various business needs, providing a seamless experience that can significantly boost your company’s efficiency. Here’s why you should consider using Google Workspace for your business.

    Enhanced Collaboration

    One of the standout features of Google Workspace is its emphasis on collaboration. Tools like Google Docs, Sheets, and Slides allow multiple users to work on the same document simultaneously. Real-time editing and commenting streamline teamwork, making it easier for employees to share ideas and feedback instantly. This is particularly beneficial for teams working remotely or from different locations.

    Seamless Communication

    Google Workspace includes robust communication tools such as Gmail, Google Meet, and Google Chat. Gmail offers a professional email service with ample storage and advanced spam filtering. Google Meet enables high-quality video conferencing, which is essential for virtual meetings and remote work. Google Chat facilitates quick messaging and can be used for both individual and group conversations, ensuring that all team members stay connected.

    Integrated Productivity Tools

    The suite also includes Google Calendar for scheduling, Google Drive for cloud storage, and Google Keep for note-taking. Google Calendar helps in organizing meetings and events, ensuring that everyone is on the same page regarding schedules. Google Drive provides secure, cloud-based storage for all your files, allowing easy access from any device. Google Keep is perfect for jotting down quick ideas and reminders.

    Advanced Security Features

    Google Workspace is built with security in mind. It offers advanced protection against phishing and malware, two-step verification, and endpoint management to safeguard your data. Admin controls allow you to manage user access and set security policies across the organization, giving you peace of mind knowing your business data is protected.

    Cost-Effective Solution

    Google Workspace offers various pricing plans to fit different business sizes and needs. Whether you are a small business or a large enterprise, there is a plan that can cater to your requirements without breaking the bank. The scalability of Google Workspace means you can start small and upgrade as your business grows.

    Easy Integration and Customization

    Google Workspace integrates seamlessly with other popular applications and services, such as Microsoft Office, Salesforce, and Slack. This ensures that you can continue using your preferred tools while benefiting from the integration capabilities of Google Workspace. Additionally, the Google Workspace Marketplace offers a wide range of third-party apps that can be added to enhance functionality.

    User-Friendly Interface

    The user interface of Google Workspace is intuitive and easy to navigate, which reduces the learning curve for new users. This means that your team can quickly adapt to using these tools, minimizing downtime and maximizing productivity.

    Reliable Support and Resources

    Google provides comprehensive support for Workspace users, including 24/7 customer service, extensive online resources, and a vibrant community forum. Whether you need help troubleshooting an issue or want to learn more about utilizing the tools effectively, Google’s support system is there to assist you.

    Conclusion

    Incorporating Google Workspace into your business operations can lead to significant improvements in collaboration, communication, productivity, and security. Its cost-effectiveness, easy integration, and user-friendly design make it a valuable asset for businesses of all sizes. By leveraging the power of Google Workspace, you can streamline your workflows, enhance team collaboration, and ultimately drive your business toward greater success.

    For more information on how Google Workspace can benefit your business and other professional services we offer, visit Property Damage Solutions.

  • Top Maintenance Tips to Avoid an Insurance Claim

    Avoid filing a claim ask about our Home Maintenance & Mold Warranty Program

    Top Maintenance Tips to Avoid an Insurance Claim

    Owning property comes with the responsibility of maintaining it to avoid unexpected damage that could lead to costly insurance claims. Proactive maintenance not only preserves the value of your property but also ensures safety and peace of mind. Here are some top maintenance tips to help you prevent damage and avoid insurance claims.

    1. Regular Roof Inspections

    Your roof is your home’s first line of defense against the elements. Regularly inspect your roof for missing, damaged, or loose shingles. Addressing minor issues promptly can prevent leaks that lead to water damage, mold growth, and structural issues. Pay special attention to flashing around chimneys, skylights, and vents, as these areas are prone to leaks.

    2. Clean Gutters and Downspouts

    Clogged gutters can cause water to overflow and damage your roof, siding, and foundation. Clean your gutters and downspouts at least twice a year, especially during the fall when leaves are abundant. Ensure that water is directed away from your home’s foundation to prevent flooding and erosion.

    3. Maintain Your HVAC System

    Your heating, ventilation, and air conditioning (HVAC) system should be inspected and serviced annually. Replace filters regularly to ensure efficient operation and prevent breakdowns. A well-maintained HVAC system not only improves air quality but also reduces the risk of fire hazards associated with malfunctioning units.

    4. Check for Plumbing Leaks

    Leaky pipes can cause significant water damage over time. Regularly inspect under sinks, around toilets, and near appliances like dishwashers and washing machines for signs of leaks. Address any issues immediately to prevent water damage and mold growth. Consider installing water leak detectors in high-risk areas for added protection.

    5. Inspect Electrical Systems

    Faulty wiring is a common cause of house fires. Have a licensed electrician inspect your electrical system periodically, especially if you live in an older home. Replace frayed wires, update outdated circuits, and ensure that all outlets and switches are in good working condition. Avoid overloading circuits and using extension cords as a permanent solution.

    6. Test Smoke and Carbon Monoxide Detectors

    Smoke and carbon monoxide detectors are essential for your safety. Test these devices monthly and replace batteries at least once a year. Ensure that detectors are installed on every level of your home and near sleeping areas. Replace any detectors that are over ten years old to ensure they are functioning properly.

    7. Seal Windows and Doors

    Inspect the seals around your windows and doors to ensure they are intact. Proper sealing prevents drafts, reduces energy costs, and keeps moisture out. Replace any damaged weather stripping and use caulk to seal gaps and cracks. This will also help keep pests from entering your home.

    8. Trim Trees and Shrubs

    Overgrown trees and shrubs can cause damage to your home during storms. Regularly trim branches that overhang your roof or are close to power lines. Remove dead or diseased trees that could fall and cause damage. Proper landscaping maintenance not only protects your home but also enhances its curb appeal.

    9. Inspect Foundation and Crawlspaces

    Cracks in your foundation or crawlspace can lead to serious structural problems and water infiltration. Inspect these areas regularly for signs of damage, such as cracks or shifting. Address any issues promptly to prevent further deterioration. Consider crawlspace encapsulation to protect against moisture and mold.

    10. Routine Maintenance of Appliances

    Home appliances such as washing machines, dishwashers, and water heaters can cause significant water damage if they malfunction. Regularly inspect hoses and connections for signs of wear and tear. Replace any damaged parts and follow the manufacturer’s maintenance recommendations to extend the life of your appliances.

    By following these maintenance tips, you can significantly reduce the risk of property damage and avoid the hassle and expense of insurance claims. Ask about our Home Maintenance & Mold Warranty program. For professional assistance with water damage, mold remediation, or any other restoration needs, contact Property Damage Solutions at 859-302-9666 or email us at propertydamage123@gmail.com. We are here to help you keep your property in top condition.

Dont Let Water Damage Destroy Your House

Call For An Inspection: (859)302-2702

We Servere:

Lexington, Kentucky

Richmond,Kentucky

Newby,Kentucky

Nicholasvillle,Kentucky

Georgetown, Kentucky

Winchester, Kentucky

Follow Me On

Subscribe To My Newsletter

Subscribe for new travel stories and exclusive content.